Light Steel house’s advantage
1)Light steel structure’s technical and product is very mature, can be produced batch and batch.
2)Long usage life. Normally, it can be used about 275 year (this date from North America).
3)Light steel contruction house is more better for anti-earthquake, the house won’t fall down until the earthquake lower than 9th class.
4)Can bear strong wind well: our light steel construction can bear 12 class strong wind (1.5KN/㎡)
5)Light steel house is good for enviroment, it can be moved and the material can be reclycled.
6) Light steel house structure itself weight is ligt, only about 1/4 compare to concrecte structure, so the foundation is more easy to build.
7) Compare to wood house, light steel structure house is good for anti white ant.
8)The whouse house is stable and low cost.
9)Light steel structure inside space cover is more bigger than concrete building
10) Light steel building’s fitting part is easy for batch producing in factory
11)Light steel house can be finished in more short days to keep around enviroment in low noise
12) Light steel house is good for keep enviorment clean and less waste
13) The concrete building need about 40years drying completely, so the house will be wet and not good for human health. Also the light steel wall only need a little place, so it can save land space for building wall.
14) All the material for light steel house are machined in factory batch by batch, the accuracy is more better to ensure the house quality,other traditional construction type have no idea to reach like this.
2. Machining raw material parameter
Prameter | Description |
Purlin Size | C89x38x10 |
Suitable material | G550 high tension grade plate/zinc coated plate/aluminum-zinc coated plate |
Tension grade | 350MPa-550MPa(G450 middle-carbon steel is more better) |
Material thickness | 0.7-1.2mm |
Material width | 174mm |
![]() |
3. Producing line parameter
3.1 Uncoiler
Hydraulic constrol system conrol release or clamp steel coil, auto-stop device, frequency inverter driving
Coil Width: 50-500mm
Suitable for coil inside hole diameter: 450-530mm
Coil outer diameter:≤1300mm
Capacity: 3T
Main motor: 1.5Kw
Hydraulic motor: 1.5Kw
3.2 Punching device (6sets)
Description (die material : SKD11) | Qty |
50*12mm punching die(for cutting side rolling material) | 1 set |
beehive hole die | 1 set |
Ф13mm installing hole(for foundation bolt | 1 set |
60*30mm punching die (for cable used hole) | 1 set |
89*50 squre hole die ( for cutting plate web) | 1 set |
45°angle cutting die | 1 set |
plate web shrink die | 1 set |
3.3 Roll forming machine (1 set)
Transimit type: motor+gear and chain sprocket
Main motor: 5.5Kw(servo-motor)
Roller material: SKD11(heat treament and surface polishing)
Main shaft material: 40Cr(tempering treatment)
Forming speed: 30m/min
Producing capacity: 80-100m2 /day
Forming method: cold rolling rollforming
Forming size: C89*38*10
3.5 Hydraulic station (1 set)
Hydralic motor power: 5.5KW
Hydraulic parts brand: Japanese yuken
Oil tank volum: 120L
3.6 Design software (1 set)
Vertex systems (Australian brand)
Automatic build 3D mould
Automatic create 3D purlin structure drawing, 3D decoration effective drawing
Automatic calculate structure material list
Can transmit kinds of format drawing or photos
Automatic transform machining data
Needn’t update, can be worked forever
3.7 Control system (1 set)
Long distance pass on or USB input machine&producing documents
IPC computer on set (or notebook computer, operating system: windows7
PLC control system
Upper software
Control punching hole postion
Control cutting position
Control producing batch
Control producing piece
Real time monitoring
3.8 Inkjet printer
Automatic print letter, date on final product
3.9 Project sample