Home >>Products Line >>Double Layer Roll Forming Machine

Double Layer Roof Sheet Roll Forming Machine, Double Deck Roll Forming Machine

Double Layer Roof Sheet Roll Forming Machine, Double Deck Roll Forming Machine

Bogong Brand Working Layer Exchanging Details

Double Layer Roof Sheet Roll Forming Machine also be called Double Deck Roll Forming Machine, two levels setctions can not working at the same time, we have designed clutch to change working levels. If we need the produce above level, switch the clutch manually to above passing level.

Final Steel Roof Sheet inside Roll Forming Machines

Roof Sheet Design

Suit for Pre-paint Coil,0.7mm Minimum Thickness, 1.0mm Maximum Thickness, The raw material 0.7mm steel sheet for inspection, in common use, Grade: G450.

Roll Forming machine Accessaries

Whole Machine Main Accessaries
5tons hydraulic decoiler 1 set
Main roll forming machine 1 set
Hydraulic cutting off system 1 set
PLC control system 1 set
Product rack 3 units

5Ton*1250mm Hydraulic un-coiler

Hydraulic system to expand coil inner hole;hydraulic motor: 3KW;

Frequency adjust speed, driving motor: 3KW

With supporting rack at the end

Coil inner diameter: 480-540mm

Load Capacity: Max. 5Tons; Coil Width Max. 1250mm

With limited switch to control stop or start the system automatically

Roll Forming Machine Parameter

Double Layer Roll Forming Machine

H400 steel for machine frame

Upper Level for YX38-200-1000 profile, 21-station to form

Lower Level for YX45-150-900 profile, 22-step to form

Shafts Diameter=ф75mm, Precision Machined
Rollers manufactured from 45 # steel, CNC lathes, hard Chrome Coated
Main motor =11KW, Frequency speed control
Forming Speed: 15-20m/min

The two levels can’t be run at the same time, Manual Clutch to switch the driven system

Hydraulic Cutting Device
Main hydraulic parts are Beijing Huade brand
Pump motor =4KW; Cutting pressure=Max.8-15Mpa

Cuing tool material: Cr12, Heat treatment

Two pairs of cutting tool, one for YX38-200-1000, another for YX45-150-900

PLC Control System
Control the cutting length & quantity automatically
Combined with:PLC(detal, Taiwan), inverter(Delta Taiwan), Touch Screen (delta, Taiwan), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control voltage 24V

Contact us soon for more information of our kinds of roll forming machines.