Product Description
        The floor deck roll formed by Chinese Floor Deck Roll Forming Machine is used for floor decking in building. We need’t dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, due to it is beautiful enough , we needn’t decorate the ceiling again. This series product is suitable for steel structure factory and public big building.

Detailed Product Description

1. The Chart of Process Flow

decoiling→active feeding→roll forming→measuring length→cutting to length→product to stand

2. Technical Parameters

 1) Manual inner tight decoiler

a. coil inner diameter: 470mm-540mm

b. max width of coiling: 1000/1200mm

c. max weight of loading: 7000kg

d. hydraulic station power:4kw

e. motor power: 3kw

f. working pressure: 10Mpa

2) Main forming machine

a. number of forming steps: 22 steps

b. material of shaft: 45# steel adjustable treatment.

Outer diameter: 80mm

c. material of roller15 GCR bearing steel treatment HRC58-60

d. main motor power: 15kw

e. forming speed: 8-10m/min

f. stand 350# steel welding

g. the plating chromium of roller surface0.05mm

3) hydraulic cutter

a. material of blade:Cr12 with quenched treatment60-62

b. cutting system: adopt advanced hydraulic drive, automatic cut afterforming,  stop cutting off

3. Electrical System

The main computer (PLC): Delta, Simens or Mitsubish

4. Hydraulic System

1). Adopting advanced hydraulic system of TaiWan

 2). Power:5.5KW

Decking floor sample for reference

Company corner