Wholesale Galvanized Steel Roller Shutter Door Making Machine

Wholesale Galvanized Steel Roller Shutter Door Making Machine

Roll Forming Machine Technical Parameter

Parameters	Specification
Voltage	380V/50HZ/3PH or customized
Driving Motor	4KW
Hydraulic Cutting Motor	2.2KW
Forming Steps	15
Working Speed	15-25m/min
Material Width	136mm
Thickness for Steel	0.6-1.0mm
Shaft Diameter	65mm
Shaft Material	High grade 45# forged steel
Roller Material	45# steel with polished and heat treatment (base on raw material type)
PLC Cabinet	Schneider, Mitsubishi or Delta
Encoder	Omron
Sprocket Wheel	45 steel high-frequencies quench
Cutting Blade Material	Cr12 steel
Machine Frame Material	Fine welded structural steel;
Roofing Material	PPGI, GI steel G245-345
Painted Color	Blue+Gray White Or Customization
Overall Size	6500*1350*1550mm
Weight	2500KGS

• 1. Whole Steel Roller Shutter Door Making Machine has includes de-coiler, feeding and guiding system, roll forming system, cutting device, hydraulic system and PLC control system, below are detailed information for each part:

  2. 
     

  3. Decoiler: There is hydraulic de-coiler and manual de-coiler two design, this part is used to hold the galvanized steel coil, which serves as the raw material for the roller shutter door panels.

  4. 
     

  5. Feeding and Guiding System: This section is at the beginning end of roll forming machines, it is to accurately feed the galvanized steel coil into the roll forming section, often including guiding rollers to ensure proper alignment.

  6. 
     

  7.           

  8. 
     

  9. Roll Forming System: Considered as core component of roller shutter door making machine, it can shape the flat galvanized steel strip into the profile of the roller shutter door. It consists of a series of rollers arranged in pairs to gradually bend the metal strip into the desired shape.

  10. 
      

  11. Cutting Device: Once the metal strip has been formed into the desired profile, a cutting mechanism is used to trim the excess material and cut the formed sections to the required length. Normally, it is automatic and controlled PLC control system.

  12. 
      

  13. Hydraulic System: Provides power for various functions such as cutting and forming, often including hydraulic cylinders and pumps. Steel Roller Shutter Door Making Machine line normally only has one cylinder for cutting off action.

  14. 
      

  15.                
      

  16. Tags:    rolling shutter machine      rolling shutter making machine      shutter patti machine      shutter making machine      Galvanized Steel Roller Shutter Door Making Machine      roller shutter door machine